<i id="zbdva"><nav id="zbdva"></nav></i><th id="zbdva"><legend id="zbdva"></legend></th>

    <dl id="zbdva"><rp id="zbdva"></rp></dl><div id="zbdva"></div><button id="zbdva"></button>

    SERVICE CENTER
    You are here: Home ? SERVICE CENTER
    Team
    Service Team:
    Yoobond Service Team Provides the one-stop Solution for Primary Services needs of its sale and after-sales subdivisions.Updated suggestions and information will be provided to customers in time.
    Management Team:
    Yoobond Management team strictly follows the ISO9001:2008 Standard system,We have a series of executive sequences a more effective service supply chain to our customers consistently.
    R&D Team :
    Yoobond R&D team is staffed with trained professionals that could help customers find solutions for new composite panels and General feedback . New developing products such as Special surface for Aluminum composite Products,Aluminum PVC foamed Composite panels. Aluminum MDF Composite Panels,metal composite panel and FRP PP Honeycomb composite panels which from sourcing qualified raw materials and improving the Composting production processing.
    Raw Materials
    Mill Finished Metal Coils
    Paint
    Protective Films
    Adhensive Films
    Quality Control
    Yoobond has established a complete Physics and Chemistry Testing Center. According to the requirements of clients and based on the standard of GBT 17748-2016 &GBT 22412-2016 Which could be able to make precise test for our Composite Products.
    Digital Printing Surface Treatment
    Direct-to-substrate Digital Printing
    Yoobond UV Digital Printing Panels is very flat and smooth which have outstanding ink absorption ability, could be printable on all standard flat bed printers.
    Yoobond Panel is resistant to temperatures from +80℃ to -50℃,resistant to water and UV,yellow or distortion through UV lamps does not occur,Hence,digital printing signs could be used long-term and keep their color even outside.
    To avoid fingerprints on the surface gloves are the easiest solution,Various processing techniques such as routing,folding or bending are possible with Yoobond Panels, even after printing.

    Screen Printing
    Yoobond panels are well suited for screen printing, it is important to remove the protection film and to clean the surface using ethyl alcohol or isopropyl alcohol and a fluff-free cloth prior to printing,The alcohol must not be applied directly on the panel, between cleaning and Printing the alcohol needs approx 10-15 minutes to evaporate. A lamination of the prints can be useful in order to achieve special surface effects or to improve mechanical or chemical properties.
    Packing & Loading
    All Yoobond Panels are loaded in bulks or Wooden Pallets(Solid wood or plywood are standard Pallets),special requirements could be customized ,please contact with Yoobond Team
    Loading in Bulk
    Loading With Pallets
    All Pallets are clearly labeled with the relevant description of the Panels sheets inside each Pallet, for easy identification at the Customer's final destination.
    Wooden Pallets With Solid Wood
    Profile Side
    End-Side
    Base-Pallets
    Wooden Pallets with Plywood
    Profile Side
    End-Side
    Base-Pallets
    To lower pallet weights. it should be noted that the reduction of the weight of pallets will reduce the loading volume per container and increase the unit cost of the Panel Sheets.
    The Law and Regulations in certain destination countries might require that the wooden pallets be fumigated and treated. If such treatment is required, then the Customer must instruct Yoobond of such regulations and requirements at the time of confirming their order, so that the necessary arrangements can be made by Yoobond in advance to avoid any delays due to non-compliance.
    Storage & Handling

    A forklift, which can support lifting weights of at least 2500 kg is used to move the pallets around.

    The length of the fork should be at least 1.5m in length, so that it can adequately support the weight of the pallet and prevent the pallet from tipping over or being damaged.


    When storing pallets, they should be stored in a clean, dry and covered warehouse or space at all times, so as to prevent the pallets from being exposed to the sun, rain, moisture and other elements.



    When stacking the pallets on top of each other, the maximum height should not exceed 6 meters, so as to avoid warping and bending of the Panel Sheets.

    Only pallets of identical size should be stacked one on top of the other.

    All pallets must always be placed on horizontal racks or stacked horizontally.

    When stacking panel sheets on top of each other, nothing should be placed between them, so as to avoid causing any marks, dents or impressions on any of the panel's surfaces.



    If panels are removed from the pallets, do not lean the removed panels against any vertical wall or similar support, so as to avoid damage to the surface of the panel Sheets.

    When removing a panel sheet from a pallet, it must be carried out with at least 1 worker, at opposite ends and they should only remove 1 panel at a time.



    It is highly recommended to cover pallets with a plastic sheeting to prevent accumulation of dust and dirt on the panel sheets.

    Storage exceeding 6 months or more must be avoided, as this could cause the protection film to over-stick to the panels coated surface.


    Cleaning & Maintenance
    For all Yoobond panels sheets to retain their color, gloss and aesthetic appeal, an approved cleaning company must carry out regular cleaning and maintenance of the panels.

    Yoobond coated Panels are smooth and thus do not retain much dirt and soil on their surfaces, however if the Panels are not regularly cleaned and maintained, dirt and soil could build up on the panels' surfaces. The durability and Warranty of the panels could be affected, if the panels are not regularly cleaned and maintained, due to a build up of dirt and soil, this could cause coating surface issues to arise. This will also negatively impact the aesthetic look, color and gloss of the panels.

    When the panels on a project are due for their first cleaning and maintenance process, the cleaning company must first carry out tests for compatibility between their proposed cleaning agent and the panels. It is recommended that the testing is carried out on a spare panel or on an inconspicuous area of the project panel's.

    Once a cleaning agent is found to be compatible with the Panels, then this cleaning agent must always be used. If at any time the cleaning company wishes to change their cleaning agent, they must go through the same testing process as stated above.

    When cleaning the Panels, it must be ensured that the surface temperature of the Panels is always below 40°C at all times, so as to avoid any unforeseen issues with the Panels surfaces. As far as possible try to carry out the cleaning process in the shade and at moderate temperatures. Do not carry out any the cleaning process when it is raining, snowing or in similar conditions.

    A forceful water rinse from top down is recommended, as an initial step of the cleaning process, followed by a low water volume with a moderate pressure for the remainder of the cleaning process.

    The cleaning must be done with a uniform pressure and with a horizontal motion first, followed by a vertical motion from top to bottom of the panel's coated surface.

    It is essential that either a non abrasive grit free pad, soft grit free squeegee or soft lint-free cloth is used to clean or wipe the surface of the Panels, so as to prevent abrasions and scratches on the panel's coated surface.

    A mild cleaning agent such as IPA solution (Isopropyl Alcohol) with a neutral PH of 5-10% can be used for the removal of light and dirt soil.


    For stubborn stains, such as those caused by sealant and caulking compounds, a mild solvent such as IPA (Isopropyl Alcohol), n-Hexane or Ethanol 46.7% is to be used. If a concentrated alcohol based cleaning agent is being used, it is required

    that the cleaning agent's manufacturer's printed instructions are followed with regards to dilution and application.

    It is recommended to start the cleaning from the top of the building, as opposed to the bottom of the building, so as to avoid any rundown and streaking of the water and cleaning agents on the panels that have already been cleaned.

    After the soil and dirt has been removed, the Panels must immediately be rinsed with clean water and wiped with a soft non-abrasive cloth.



    Do not use any strong organic solvents or cleaning agents under any circumstances, such as MEK (Methyl Ethyl Ketone), MIBK (Methyl Iso Butyl Ketone), Triclene, Paint Thinner, household detergents or cleaning agents , strong alkali or strong acid based cleaning agents containing sodium carbonate, caustic soda, potassium hydroxide or similar, or any such strong abrasive and lacquer dissolving agents. All cleaning agents must have a neutral PH of 5-10% only.

    Sharpshooter is a versatile cleaner from 3M (Alkali,PH12) and Windex is a glass cleaner from Johnson (alkali,PH11).As these are alkali solutions,prevent eye and skin contact.Follow manufacturer's safety instructions.
    caop0rn超踫免费视频在线